Skip to main content

Volume 8 Supplement 1

Genetic Analysis Workshop 18

A comparative analysis of family-based and population-based association tests using whole genome sequence data

Abstract

The revolution in next-generation sequencing has made obtaining both common and rare high-quality sequence variants across the entire genome feasible. Because researchers are now faced with the analytical challenges of handling a massive amount of genetic variant information from sequencing studies, numerous methods have been developed to assess the impact of both common and rare variants on disease traits. In this report, whole genome sequencing data from Genetic Analysis Workshop 18 was used to compare the power of several methods, considering both family-based and population-based designs, to detect association with variants in the MAP4 gene region and on chromosome 3 with blood pressure. To prioritize variants across the genome for testing, variants were first functionally assessed using prediction algorithms and expression quantitative trait loci (eQTLs) data. Four set-based tests in the family-based association tests (FBAT) framework--FBAT-v, FBAT-lmm, FBAT-m, and FBAT-l--were used to analyze 20 pedigrees, and 2 variance component tests, sequence kernel association test (SKAT) and genome-wide complex trait analysis (GCTA), were used with 142 unrelated individuals in the sample. Both set-based and variance-component-based tests had high power and an adequate type I error rate. Of the various FBATs, FBAT-l demonstrated superior performance, indicating the potential for it to be used in rare-variant analysis. The updated FBAT package is available at: http://www.hsph.harvard.edu/fbat/.

Background

Both existing and novel methods incorporating family-based and population-based designs were compared in this report. All the methods we compare use a single test for a set of multiple single-nucleotide polymorphisms (SNPs) in a region (gene in our setting). This approach avoids the problem of needing large samples for testing rare variants individually.

The term family-based association tests (FBAT) refers to a suite of family-based association testing methods that rely on an extension of the transmission disequilibrium test. We used 2 newly developed rare-variant association tests in the framework of FBAT, FBAT-v, FBAT-lmm, and 2 previously existing multimarker FBAT tests, FBAT-m and FBAT-l. Although the Genetic Analysis Workshop 18 (GAW18) sample size is large, it is made up of a small number of pedigrees with a large number of individuals per pedigree. The FBAT approach treats all nuclear families in a pedigree as independent, unless a trait locus is known to be linked to the markers under test. The Q1 variable, which was not simulated to be directly associated with any causal gene, was very highly heritable (60%; Table 1), and failure to adjust using an empirical variance led to inflated type I errors for Q1.

Table 1 Heritability and coheritability

We chose to first test the methods on MAP4, a gene that was simulated to be associated with blood pressure in the GAW18 data. Then, the most powerful tests that maintained adequate type I error were used on a whole chromosome scan of chromosome 3. Because many of the tests we considered are unable to provide results when using all SNPs, our analysis strategy starts with reducing the number of SNPs based on functional assessment.

Methods

Variants were filtered based on their predicted function. For coding variants, SnpEff (http://snpEff.sourceforge.net) was used to predict nonsynonymous, splice, and stop variants. Nonsynonymous variants were further classified using polyphen2 [1]. Lymphoblastoid cell line (LCL) expression quantitative trait loci (eQTLs) from Caucasian (CEU) International Haplotype Map Project (HapMap) samples were used to highlight SNPs affecting the transcription of MAP4 [2]. Polyphen scores above 0.5 were included together with splice and stop variants in our analysis. An arbitrary cutoff of 3.4 (-log10 p value from eQTL analysis) was used for eQTL filtering.

FBAT-v [3] and FBAT-lmm (JJ Zhou, MN Laird, personal communications, 2013) are 2 newly developed gene-based rare-variant tests. FBAT-v is analogous to gene-based burden tests developed for case-control studies. FBAT-lmm is a variance component test. Although FBAT-lmm is also a transmission disequilibrium-based test, the trait is modeled through a linear mixed model (LMM), where a random genetic component is introduced and tested. It allows genetic effects within the region to be both protective and deleterious. P values are determined using 1000 permutations. FBAT-m [4] and FBAT-l [5] are part of the preexisting FBAT suite of tests that were designed for common variants, but can be used with multiple SNPs. FBAT-m is a multivariate test with degrees of freedom equal to the number of linearly independent SNPs. The linear combination test (FBAT-l) used the noninformative families to estimate the optimal weights for the linear combination of SNPs.

The sequence kernel association test (SKAT) has been proposed as a test for association between both common and rare genetic variants in a region using either continuous or dichotomous traits [6, 7] for population designs. Under the semiparametric regression model, a local relationship (similarity), or "kernel" matrix, is estimated using the genotypes from a testing region, for example, identical by state (IBS) kernel and gaussian kernel for nonlinear effects. As described by Yang et al, genome-wide complex trait analysis (GCTA) is a toolkit designed to estimate heritability using genome-wide association studies (GWAS) data from unrelated individuals based on an LMM under a polygenic assumption [8, 9]. We have adapted the GCTA approach to test only the SNPs in a gene or region, and, as such, it is comparable to the SKAT approach; indeed, LMM and semiparametric regression share many theoretical connections [10].

Results

We used the complete set of 200 replicates for assessing type I error and power, using an alpha of 0.05 to determine statistical significance. In our analyses, we focused on 2 continuous phenotypes: systolic blood pressure (SBP) and diastolic blood pressure (DBP). Heritability estimates for SBP and DBP were both in the range of 20% to 30% (see Table 1). Coheritabilities for the 2 traits (i.e., the proportion of phenotypic covariance explained by common genetic covariance) ranged from 30% to 70% for 3 exams (see Table 1). The analyses were adjusted by age, sex, age*sex, and BPmeds (i.e., current use of antihypertensive medications) at each exam by generating standardized residuals. We also analyzed average residuals over 3 exams. For the Q1 phenotype, we adjusted for age and sex only.

Functional assessment for screening

The MAP4 gene encompassed a total of 894 SNPs (Table 2). Of the 894 variants in the MAP4 gene, we identified a total of 28 SNPs that met the functional criteria (Tables 2 and 3). Of these, 8 were true causal variants. More than half (57%) of the 28 SNPs were rare (minor allele frequency [MAF] <5%). The same set of functional variants were used for the comparison of both family-based and population-based designs.

Table 2 Summary statistics of MAP4 gene
Table 3 Names and MAF of 28 SNPs that remain for all analyses

Family-based analysis

Because of the large number of markers analyzed in a region, FBAT-m did not perform well and the results are not reported. Likewise, results from FBAT-lmm were also omitted, as it currently cannot adjust for multiple families within a pedigree. For the extended pedigree analysis of the MAP4 gene region, the empirical variance estimator [3, 5, 6] is needed to maintain type I error when phenotypes of relatives are highly correlated. Both FBAT-v -e (empirical variance estimator) and FBAT-l highlighted the association of the MAP4 gene across all simulation replicates (Table 4). The highest power and the strongest association signal was identified using FBAT-l.

Table 4 Type I error and power comparison based on family studies (n = 849).

Population-based analysis

Using 142 unrelated individuals, type I error and power between SKAT and GCTA were compared for association with MAP4 (Table 5). Both SKAT-o and SKAT default parameter settings were used. In our analysis, SKAT using the default weighting schemes (weighted by beta[0,25]) has the highest power, which we reported here. Both methods maintain correct type I error. SKAT had slightly higher power in this study, although GCTA had power greater than 85% for all phenotypes tested.

Table 5 Type I error and power comparison based on population study (n = 142)

Chromosome 3 scan

A whole genome scan was performed using FBAT-l for both family and population-based methods after adjusting for first 10 principal components generated by EIGENSTRAT [11]. Only chromosome 3 was scanned for this manuscript, which is suggested by the GAW18 data description. Genes were defined by transcription start and end positions obtained from the University of California Santa Cruz (UCSC) Genome Browser hg19 build (http://genome.ucsc.edu/). In total, 1443 genes were analyzed for their association with average residual of blood pressure over three time points (Figure 1). The same filtering algorithm used in the analysis of candidate gene MAP4 was adopted. Using FBAT-l and SKAT, we identified the MAP4 gene as passing the genome-wide significance level. SKAT also identified gene DTX3L, which is adjacent to the causal gene ABTB1. Although no genes pass genome-wide significant level using GCTA, genes that are the most significant (MAP4 and DTX3L) overlap with the results from SKAT.

Figure 1
figure 1

Genome scan using methods FBAT-l, SKAT, and GCTA. Average residual of blood pressure over 3 time points was used for association analysis. Vertical line represents causal gene; genes that passed Bonferroni correction threshold are marked by red, the others are in blue.

Discussion

Both family-based and population-based analyses of whole genome sequencing data were evaluated for their power to detect associations with a simulated phenotype with variants in the MAP4 gene and on chromosome 3. This approach incorporated the use of functional prediction information to filter variants as would traditionally be done in most applied studies. Both SKAT and GCTA had high power and an adequate type I error rate. Of the various FBAT tests, FBAT-l demonstrated superior performance, indicating the potential to be used in rare-variant analysis. The lack of population substructure and availability of potential phenotypes contribute to the high performance of FBAT-l. Absent these conditions, the performance degrades. The relatively poor performance of FBAT-lmm could be a result of small sample size and concordant direction of effect size across SNPs. However, FBAT-lmm shows promise for the case where effect sizes within a test region vary in signs of risk. It does not currently have the capability to analyze extended pedigrees.

We also note that when analyzing extended pedigree data and highly correlated traits between relatives, the empirical variance estimator (-e) should be used to achieve the correct type I error. However, its use decreases the effective sample size so that it is closer to the number of independent pedigrees. Finally, our analysis demonstrates that using the average phenotype over 3 time points gives higher power compared to single-time-point phenotype analysis. This suggests the combination of the phenotypes from different time points, or even the combination of SBP and DBP, may achieve higher power.

Conclusions

In this paper, we compared various FBAT region based tests and compared family based tests with population based tests. Our results show that FBAT -l outperformed FBAT -v0 when testing MAP4 and this could be due to some causal variants of MAP4 within the variants for analysis being common. Our population-based tests comparison suggests that in the absence of population substructure, the population-based association tests are more powerful.

References

  1. Adzhubei IA, Schmidt S, Peshkin L, Ramensky VE, Gerasimova A, Bork P, Kondrashov AS, Sunyaev SR: A method and server for predicting damaging missense mutations. Nat Methods. 2010, 7: 248-249. 10.1038/nmeth0410-248.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  2. Montgomery SB, Sammeth M, Gutierrez-Arcelus M, Lach RP, Ingle C, Nisbett J, Guigo R, Dermitzakis ET: Transcriptome genetics using second generation sequencing in a Caucasian population. Nature. 2010, 464: 773-777. 10.1038/nature08903.

    Article  CAS  PubMed  Google Scholar 

  3. De G, Wip W-K, Ionita-Laza I, Laird N: Rare variant analysis for family-based design. PLoS One. 2013, 8: e48495-10.1371/journal.pone.0048495.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  4. Rakovski CS, Xu X, Lazarus R, Blacker D, Laird NM: A new multimarker test for family-based association studies. Genet Epidemiol. 2007, 31: 9-17. 10.1002/gepi.20186.

    Article  PubMed  Google Scholar 

  5. Xu X, Rakovski C, Laird N: An efficient family-based association test using multiple markers. Genet Epidemiol. 2006, 30: 620-626. 10.1002/gepi.20174.

    Article  PubMed  Google Scholar 

  6. Lee S, Emond MJ, Bamshad MJ, Barnes KC, Rieder MJ, Nickerson DA, Christiani DC, Wurfel MM, Lin X: Optimal unified approach for rare-variant association testing with application to small-sample case-control whole-exome sequencing studies. Am J Hum Genet. 2012, NHLBI GO Exome Sequencing Project--ESP Lung Project Team, 91: 224-237. 10.1016/j.ajhg.2012.06.007.

    Google Scholar 

  7. Wu MC, Lee S, Cai T, Li Y, Boehnke M, Lin X: Rare-variant association testing for sequencing data with the sequence kernel association test. Am J Hum Genet. 2011, 89: 82-93. 10.1016/j.ajhg.2011.05.029.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  8. Yang J, Benyamin B, McEvoy BP, Gordon S, Henders AK, Nyholt DR, Madden PA, Heath AC, Martin NG, Montgomery GW, et al: Common SNPs explain a large proportion of the heritability for human height. Nat Genet. 2010, 42: 565-569. 10.1038/ng.608.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  9. Yang J, Lee SH, Goddard ME, Visscher PM: GCTA: a tool for genome-wide complex trait analysis. Am J Hum Genet. 2011, 88: 76-82. 10.1016/j.ajhg.2010.11.011.

    Article  PubMed Central  CAS  PubMed  Google Scholar 

  10. Liu D, Lin X, Ghosh D: Semiparametric regression of multidimensional genetic pathway data: least-squares kernel machines and linear mixed models. Biometrics. 2007, 63: 1079-1088. 10.1111/j.1541-0420.2007.00799.x.

    Article  PubMed Central  PubMed  Google Scholar 

  11. Price AL, Patterson NJ, Plenge RM, Weinblatt ME, Shadick NA, Reich D: Principal components analysis corrects for stratification in genome-wide association studies. Nat Genet. 2006, 38: 904-909. 10.1038/ng1847.

    Article  CAS  PubMed  Google Scholar 

Download references

Acknowledgements

The GAW18 whole genome sequence data were provided by the T2D-GENES Consortium, which is supported by NIH grants U01 DK085524, U01 DK085584, U01 DK085501, U01 DK085526, and U01 DK085545. The other genetic and phenotypic data for GAW18 were provided by the San Antonio Family Heart Study and San Antonio Family Diabetes/Gallbladder Study, which are supported by NIH grants P01 HL045222, R01 DK047482, and R01 DK053889. The Genetic Analysis Workshop is supported by NIH grant R01 GM031575.

This article has been published as part of BMC Proceedings Volume 8 Supplement 1, 2014: Genetic Analysis Workshop 18. The full contents of the supplement are available online at http://www.biomedcentral.com/bmcproc/supplements/8/S1. Publication charges for this supplement were funded by the Texas Biomedical Research Institute.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Wai-Ki Yip.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

JJZ developed FBAT-lmm, ran analyses, and wrote the paper. WKY codeveloped FBAT-v and FBAT-v -e, and assisted in computing. MHC developed the functional screening algorithm for SNP reduction. DQ assisted in data cleaning and formatting, and running of principal components. MLNM edited and revised the manuscript; NML performed the overall design and edited the manuscript. All authors read and approved the final manuscript.

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver (https://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhou, J.J., Yip, WK., Cho, M.H. et al. A comparative analysis of family-based and population-based association tests using whole genome sequence data. BMC Proc 8 (Suppl 1), S33 (2014). https://doi.org/10.1186/1753-6561-8-S1-S33

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/1753-6561-8-S1-S33

Keywords